Design
Features
- Electronic control of camshaft with variable cam speed within one cycle
- Horizontal Stacking
- Servo-drive sheet transport system
- Double guided spike chains
- Multi-zone heating
- Production setting storage for up
to 32 moulds
- Multi-zone heating
- Pneumatic roll lift
|
|
Specifications
| Forming
Area |
320mm
x 150mm (12.6" x 5.9")maximum |
| Depth
of Draw (negative) |
120mm (4.7")maximum |
| Depth
of Draw (positive) |
25mm (1")maximum |
| Sheet
Width |
380mm (15")maximum |
| Material
Thickness Range |
0.25mm - 1.2mm (0.010"
- 0.048") |
| Material
Roll Diameter |
1000mm (39.3")maximum |
| Dry
Cycles per Minute |
45 maximum |
| Main
Voltage |
380V to 480V |
| Control
Voltage |
24 Volt DC |
| Power
Consumption |
5 Kilowatts/hr (Approximate) |
| Air
Pressure |
6 bar (87 PSI) minimum |
| Air
Consumption |
1250 Litres/min (43.75
SCFM) |
| Cooling Water Consumption |
13 Litres/min @ 15°C - 20° C
(2.86 gal/min @ 58°F - 68° F) |
| Machine
Dimensions (l x w x h) |
2400mm x 1750mm x
2050mm
(94" x 69" x 81 ") |
| Machine
Weight |
1000kg (2200 lb) |
|
Above specifications
subject to change
|
THERMOFORMING
MACHINES 
