Design
Features
- Electronic control of camshaft servo
driven
- Horizontal Stacking
- Servo-drive sheet transport system
- Double guided spike chains
- Multi-zone heating
- Production setting storage for up
to 32 moulds
- Pneumatic roll lift
|
|
G.N. Tooling
- Tool design, development and prototyping
- Complete production tooling
|
|
Specifications
| Product
Output Rates |
up to 12,000 parts per hour
(depending on material type, thickness
and the number of cavities)
|
| Forming
Area |
320mm
x 180mm (12.6" x 7.1")maximum |
| Depth
of Draw (negative) |
120mm (4.7")maximum |
| Depth
of Draw (positive) |
25mm (1")maximum |
| Sheet
Width |
350mm (13.8")maximum |
| Material
Thickness Range |
0.35mm - 2.0mm (0.014"
- 0.080") |
| Material
Roll Diameter |
1000mm (39.3")maximum |
| Material
Roll Weight |
250kg (550 lb)maximum |
| Dry
Cycles per Minute |
35 maximum |
| Main
Voltage |
380V to 480V |
| Control
Voltage |
24 Volt DC |
| Power
Consumption |
45 Kilowatts/hr (Approximate) |
| Air
Pressure |
6 bar (87 PSI) minimum |
| Air
Consumption |
1250 Litres/min (43.75
SCFM) |
| Water
Chiller Requirement |
0.75 Kilowatt (Approximate)
Maximum Flow 13 Litres/min |
| Machine
Dimensions (l x w x h) |
5000mm x 1800mm x
1800mm
(166" x 70.9" x 70.9") |
| Machine
Weight |
1400kg (3080 lb) |
|
Above specifications
subject to change
|
THERMOFORMING
MACHINES 
