Features and benefits
- In-mould cutting ensuring consistent and accurate trim
- Oversized tiebars
- Low energy consumption
- Double toggle system
- Multi-zone heating
- Minimum floor space requirements
- Static eliminator
- Low air consumption
- Photo scanning available for preprinted sheet
- Electric preheater
- Stacking equipment available
|
|
G.N. Tooling
- Cost effective tooling is designed, manufactured and production tested at our facility
|
|
Specifications
| Forming
Area |
432 x 330mm (17"
x 13") maximum |
| Depth
of Draw |
100mm (4") maximum |
| Knife
Length |
3175mm (125")
maximum |
| Clamping Force |
45 ton |
| Sheet
Width |
533mm (21")
maximum |
| Material
Thickness Range |
0.15mm - 1.00mm (0.006"-0.040") |
| Material
Roll Diameter |
610mm (24")
maximum |
| Dry Cycles
per Minute |
30 maximum |
| Main Supply Voltage |
220V to 480V
24 Volt DC Control Voltage |
| Power
Consumption |
4.5 Kilowatts/hr (Approximate) |
| Air
Pressure |
6.8 bar (100 PSI)
minimum |
| Air
Consumption |
688 Litres/min (24
CFM) |
| Cooling
Water Consumption |
6 Litres/min @ 15°C
- 20°C
(1.5 gal/min @ 58°F - 68°F) |
| Machine
Dimensions (l x w x h) |
2400mm x 1422mm x
2032mm
(95" x 56" x 80") |
| Machine
Weight |
1678 kg (3700 lbs) |
|
Above specifications
subject to change
  |
THERMOFORMING
MACHINES 
