| The GN1914DM with patented technology is a plug-assisted, Dual Mould Thermoforming Machine equipped with multi-zone upper and lower ovens. It will thermoform parts to a depth of 152mm (6") in two negative moulds each having a maximum forming area of 482mm x 355mm (19" x 14"). The GN1914DM utilizes an in-mould trim that guarantees the production of 100% identical parts while keeping tooling costs at a fraction of other in-mould cutting systems. Parts are handled by a robotic part handling system ensuring the steady, dependable delivery of stacked product. This extemely smooth operating machine truly is a high-output, high-volume Thermoformer.
Features and Benefits
- Robotic product handling system
- Built-in diagnostic system
- Multi-zone upper and lower ovens incorporating an infrared heating system
- Positive and negative forming
- Quick tool changes
|
|
Optional Equipment
- Material preheating station
- Servo plug
- Magnetic quick tool change system
- Motorized material roll holder
- Scrap handling system
- Additional zoning of upper and lower ovens
|
|
G.N. Tooling
- Cost effective tooling is designed, manufactured and production tested at our facility
|
|
Specifications
| Forming
Area |
482mm x 355mm (19”
x 14”) maximum
241mm x 190mm (9.5” x 7.5”) minimum |
| Depth of
Draw Maximum |
152mm (6”) below sheet
line
15mm (.59”) above sheet line |
| Knife
Length |
5,000 mm (197”) maximum |
| Sheet Width |
533mm (21”) maximum
292mm (11.5”) minimum |
| Material
Thickness Range |
0.25mm -1.50mm (0.10”-
0.060”) |
| Material
Roll Diameter |
1200mm (47”) maximum |
| Dry Cycles
per Minute |
50 maximum |
| Main Supply Voltage |
380 to 480 V
24 Volt DC Control Voltage |
| Power Consumption |
10 Kilowatts/hr (approximate) |
| Air Pressure |
6.8 bar (100 PSI) minimum |
| Air Consumption |
2900 litres/min (102 CFM) |
| Cooling
Water Consumption |
48 Litres/min @ 15° C
- 20°C
(10.56 gal/min @ 58° F - 68° F) |
| Machine Dimensions
(l x w x h) |
6160mm x 2233mm x 2800mm
(242” x 88 ” x 110”) |
| Machine Weight |
7,260 kg (16,000 lbs) |
|
Above specifications
subject to change
 |
THERMOFORMING
MACHINES 
