Features and Benefits
- In-mould cutting ensuring consistent and accurate trim
- Oversized tiebars
- Low energy consumption
- Double toggle system
- Multi-zone heating
- Minimum floor space requirements
- Static eliminator
- Low air consumption
- Photo scanning available for preprinted sheet
- Electric pre-heater
- Stacking equipment available
|
|
G.N. Tooling
- Cost effective tooling is designed, manufactured and production tested at our facility
|
|
Specifications
| Forming
Area |
560mm x 508mm (22"
x 20") maximum |
| Depth
of Draw |
125mm (5") maximum |
| Knife
Length |
6350mm (250")
maximum |
| Clamping Force |
60 ton |
| Sheet
Width |
595mm (23.5")
maximum |
| Material
Thickness Range |
0.15mm - 1.00mm (0.006"-0.040") |
| Material
Roll Diameter |
711mm (28")
maximum |
| Cycles
per Minute |
25 maximum |
| Main Supply Voltage |
220V to 480V
24 Volt DC Control Voltage |
| Power
Consumption |
5.5 Kilowatts/hr (Approximate) |
| Air
Pressure |
6.8 bar (100 PSI)
minimum |
| Air
Consumption |
1360 Litres/min (48
CFM) |
| Cooling
Water Consumption |
6 Litres/min @ 15°
C - 20° C
(1.5 gal/min @ 58° F - 68° F) |
| Machine
Dimensions (l x w x h) |
2718mm x 1600mm x
2210mm
(107" x 63" x 87") |
| Machine
Weight |
2526 kg (5568 lbs) |
|
Above specifications
subject to change
 
|
THERMOFORMING
MACHINES 
