Features and Benefits
- In-Mould cutting ensuring consistent and accurate trim
- Integrated robotic stacking system
- Automated tool setup
- Stationary heater platen
- Heavy duty toggle system with oversized roller bearings
- High speed forming system
- Multi-zone contact heating system
- Servo motor press movement
- Electric preheater
- Microprocessor-based control systems (PLC)
- Computerized servo drive sheet transport
- Static eliminator
- Photo scanning available for preprinted sheet
|
|
G.N. Tooling
- Cost effective tooling is designed, manufactured and production tested at our facility
|
|
Specifications
| Forming
Area |
560mm
x 560mm (22” x 22”) maximum |
| Depth
of Draw |
125mm (5”) maximum |
| Knife
Length |
6985mm
(275”) maximum |
| Clamping Force |
60 Ton |
| Sheet
Width |
610mm (24”)
maximum |
| Material
Thickness Range |
0.15mm
– 1.00mm (0.006” - 0.040”) |
| Material
Roll Diameter |
711mm (28”)
maximum |
| Dry Cycles
per Minute |
25 maximum |
| Main Supply Voltage |
380V to 440V
24 Volt DC Control Voltage |
| Power
Consumption |
7 Kilowatts/hr (Approximate) |
| Air
Pressure |
6.8 bar (100 PSI)
minimum |
| Air
Consumption |
645 Litres/min (23
CFM) |
| Cooling
Water Consumption |
6 Litres/min @ 15°
C – 20° C
(1.5 gal/min @ 58° F – 68F°) |
| Machine
Dimensions (l x w x h) |
4800mm x 1600mm x
2500mm
(189” x 63” x 98”) |
| Machine
Weight |
5,500 kg (12,000
lbs) |
|
Above specifications
subject to change
  |
THERMOFORMING
MACHINES 
