Features and benefits
- In-mould cutting ensuring consistent and accurate trim
- Servo driven platen
- Six point toggle systems with oversized roller bearings
- High speed forming system
- Multi-zone contact heating system
- Electric preheater
- Microprocessor-based control system (PLC)
- Computerized DC drive sheet transport
- Photo scanning available for preprinted sheet
- Static eliminator
- Photo scanning available for preprinted sheet
- Stacking equipment available
|
|
G.N. Tooling
- Cost effective tooling is designed, manufactured and production tested at our facility
|
|
Specifications
| Forming
Area |
762mm x 762mm (30"
x 30")
maximum |
| Depth
of Draw |
125mm (5") maximum |
| Knife
Length |
11430mm (450")
maximum |
| Clamping Force |
200 Ton |
| Sheet
Width |
815mm (32") maximum |
| Material
Thickness Range |
0.15mm - 1.00mm (0.006"
- 0.040") |
| Material
Roll Diameter |
711mm (28") maximum |
| Dry Cycles
per Minute |
20 maximum |
| Main Supply Voltage |
380V to 480V
24 Volt DC Control Voltage |
| Power
Consumption |
20 Kilowatts/hr (Approximate) |
| Air
Pressure |
6.8 bar (100 PSI) minimum |
| Air
Consumption |
1200 Litres/min (48
CFM) |
| Cooling
Water Consumption |
14 Litres/min @ 15° C
- 20° C
(3 gal/min @ 58° F - 68° F) |
Machine Dimensions
(l x w x h) |
3200mm x 1905mm x 2693mm
(126" x 75" x 106") |
| Machine
Weight |
5909 kg (13,000 lbs) |
|
Above specifications
subject to change
  |
THERMOFORMING
MACHINES 
