| Features and benefits
- In-Mould cutting ensuring consistent and accurate trim
- Integrated robotic stacking system
- Automated tool setup
- Stationary heater platen
- Heavy duty toggle system with oversized roller bearings
- High speed forming system
- Multi-zone contact heating system
- Servo motor press movement
- Electric preheater
- Microprocessor-based control systems (PLC)
- Computerized servo drive sheet transport
- Static eliminator
- Photo scanning available for preprinted sheet
|
|
G.N. Tooling
- Cost effective tooling is designed, manufactured and production tested at our facility
|
|
Specifications
| Forming Area |
762mm x 762mm (30"
x 30")
maximum |
| Depth of Draw |
125mm (5") maximum |
| Knife Length |
11430mm (450")
maximum |
| Clamping Force |
200 ton |
| Sheet Width |
815mm (32") maximum |
| Material Thickness Range |
0.15mm - 1.00mm (0.006"
- 0.040") |
| Material Roll Diameter |
711mm (28”)
maximum |
| Dry Cycles per Minute |
20 maximum |
| Main Supply Voltage |
380V to 440V
24 Volt DC Control Voltage |
| Power Consumption |
9 Kilowatts/hr (Approximate)
|
| Air Pressure |
6.8 bar (100 PSI)
minimum |
| Air Consumption |
1600 Litres/min (56
CFM) |
| Cooling Water Consumption |
14 Litres/min @ 15° C
- 20° C
(3.2 gal/min @ 58° F - 68° F) |
| Machine Dimensions (l x w x h) |
6200mm x 1800mm x 2500mm
(244” x 71” x 98”) |
| Machine Weight |
8800 kg (19,200
lbs) |
|
Above specifications
subject to change
 
|
THERMOFORMING
MACHINES 
