Design
Features
- Servo driven platen
- Six point toggle systems with oversized
roller bearings
- High speed forming system
- Multi-zone contact heating system
- Electric preheater
- Microprocessor-based control systems
(PLC)
- Computerized DC drive sheet transport
with photo scanning capabilities for
pre-printed materials
- Antistatic unit
|
|
Optional Equipment
- Photoscanning registration unit for
pre-printed material
- Spare heater platen assembly (for
quick tool changes)
- Stacking equipment
|
|
G.N. Tooling
- Tool design, development and prototyping
- Complete production tooling
- Stacker change parts
|
|
Specifications
| Forming
Area |
915mm
x 635mm (36" x 25") maximum |
| Depth
of Draw |
125mm
(5") maximum |
| Knife
Length |
11430mm
(450") maximum |
| Sheet
Width |
965mm
(38") maximum |
| Material
Thickness Range |
0.15mm
- 1.00mm (0.006"-0.040") |
| Material
Roll Diameter |
711mm
(28") maximum |
| Cycles
per Minute |
20
maximum |
| Power
Supply |
415/440V
50/60Hz
24 Volt DC Control Voltage |
| Power
Consumption |
20
Kilowatts/hr (Approximate) |
| Air
Pressure |
6.8
bar (100 PSI) minimum |
| Air
Consumption |
1200
Litres/min (42 CFM) |
| Cooling
Water Consumption |
14
Litres/min @ 15° - 20°C
(3 gal/min @ 58° - 68°F) |
| Machine
Dimensions (l x w x h) |
2946mm
x 2032mm x 2693mm
(116" x 80" x 106") |
| Machine
Weight |
5909
kg (13,000 lbs) |
|
Above specifications
subject to change
|
THERMOFORMING
MACHINES 
