Design
Features
- Quick tool change
- Servo Regulators (air) (heat/form/eject)
- Swing away preheater
- Servo driven platen
- Six point toggle system with oversized roller bearings
- High speed forming system
- Multi-zone contact heating system
- Electric preheater
- Microprocessor-based control systems (PLC)
- Computerized DC drive sheet transport with photo scanning capabilities for pre-printed materials
- Antistatic unit
- Low maintenance
|
|
Optional Equipment
- Photoscanning registration unit for
pre-printed material
- Spare heater platen assembly (for
quick tool changes)
|
|
G.N. Tooling
- Tool design, development and prototyping
- Complete production tooling
|
|
Specifications
| Forming
Area |
1143mm x 813mm (45" x 32 ") maximum |
| Depth
of Draw |
125mm
(5") maximum |
| Knife
Length |
Please consult G.N. for new knife specifications |
| Sheet
Width |
1194mm
(47") maximum |
| Material
Thickness Range |
0.15mm
- 1.00mm (0.006"-0.040") |
| Material
Roll Diameter |
1000mm
(39") maximum |
| Cycles
per Minute |
20
maximum |
| Power
Supply |
380/415/440V
50/60Hz
24 Volt DC Control Voltage |
| Power
Consumption |
45 Kilowatts/hr (Maximum)
20 Kilowatts/hr (Average) |
| Air
Pressure |
6.8
bar (100 PSI) minimum |
| Air
Consumption |
1900
Litres/min (67 CFM) |
| Cooling
Water Consumption |
14
Litres/min @ 15° - 20°C
(3.2 gal/min @ 58° - 68°F) |
| Machine
Dimensions (l x w x h) |
6350mm
x 2300mm x 2800mm
(153" x 90" x 110") |
| Machine
Weight |
11,400
kg (25,000 lbs) |
|
Above specifications subject to change
|
THERMOFORMING
MACHINES 
