GN800
The GN800 is a High Speed Form/Cut/Stack Thermoformer, the first GN model that offers movable top and bottom platens. In partnership with an experienced Italian machine manufacturer, GN is re-introducing to the market a Form/Cut/Stack Thermoformer that was manufactured and distributed worldwide for many years. With the input of customers and toolmakers, the enhanced GN800 will continue to service the production requirements of companies around the world.

Main Features:
  • Forming 150mm (5.9") above and below sheet line
  • High efficiency heaters
  • Increased tonnage in both forming and cutting stations
  • In-mould-cut capability
  • Optional stacking systems
  • Optional punching station
  • Multi-purpose thermoformer for food, medical, industrial and other special applications
Optional Equipment:
  • Material pre-heating system
  • Motorized material unwind unit (required when no pre-heater is used)
GN Tooling
  • Cost effective tooling is designed, manufactured and production tested at our facility
Forming Area 830mm x 570mm (32.6" x 22.4")
Depth of Draw 150mm (5.9")
Clamping and Cutting Force 75 Ton
Sheet Width 910mm (35.8")
Material Thickness Range 0.25mm - 2.00mm (0.010" - 0.080")
Material Roll Diameter 1.2m (47")
Main Supply Voltage 3 Phase+N+PE, 50-60Hz (380-480) 225 Amps
Running Power Consumption 42 Kva (Approximate)
Air Pressure 6.2 bar (90 PSI) / 9.6 bar (140 PSI) (Minimum / Maximum)
Cooling Water Consumption 65 - 200 litres/min (17 - 53 gallons/min)
Machine Dimensions (l x w x h) 14840mm x 3500mm x 3300mm (48'9" x 11'6" x 10'10")
Menu Item

Menu Item

Menu Item


GN machines are the best in the market. Buying a machine from GN, you get quality in their products. It is very gratifying to have GN's in my company because they produce higher quality products and...

Fernando Mazzuco do Santos | Sanpack, Brazil

tradeSHOWS
ourPRODUCTS
ourSERVICES
contactUS
© 2018GN Plastics | Thermoforming Machines
Website Design by Amplify Media