GN760
The GN760 is a Plug-Assist Thermoformer incorporating GN Thermoforming Technology achieved through continuous research and development.

Main Features:
  • In-mould cutting
  • Unique plug drive with twin servo motors
  • Radiant heat system with 60 zones
  • Robotic handling system
  • Advance diagnostics
  • Powerful GN toggle system
  • Energy conservation with power regeneration circuitry
Optional Equipment:
  • Material pre-heating system
  • Motorized material unwind unit (required when no pre-heater is used)
GN Tooling
  • Cost effective tooling is designed, manufactured and production tested at our facility

Forming Area 762mm x 534mm (30" x 21") maximum
Knife Length (maximum) 8500mm (335") for APET / 9525mm (375") for other thermoformable materials
Depth of Draw 125mm (4.92") below sheet line
15mm (0.59") above sheet line
Running Power Consumption 28 Kilowatts/hr (Approximate)
Air Consumption (Approximate) 1500 nL/min @ 6.2 bar (53 SCFM @ 90 PSI)
Machine Dimensions (l x w x h) 10400mm x 3650mm x 2930mm (410" x 144 " x 116 ")
Machine Weight 7300 kgs (16100 lbs)
Material Thickness Range 0.25mm - 1.50mm (0.010"-0.060")
Air Pressure 6.2 bar (90 PSI) minimum / 9.6 bar (140 PSI) maximum
Cooling Water Consumption 65 - 150 litres/min (17 - 40 gallons/min)
Sheet Width 815mm (32") maximum
Material Roll Diameter 1000mm (39")
Main Supply Voltage 3 Phase + N + PE, 50-60 Hz (380-480V)
Menu Item

Menu Item

Menu Item


Our relationship with GN began in 1986 and we have enjoyed 28 years of excellent service!...

John Wherry | Revere Packaging, USA

tradeSHOWS
ourPRODUCTS
ourSERVICES
contactUS
© 2018GN Plastics | Thermoforming Machines
Website Design by Amplify Media