GN3625DX
Design Features
  • The GN3625DX Thermoformer was developed to meet the demand for thermoformed APET products. It was designed to provide greater APET cutting capacity than the standard
  • Contact-Heat Cut-In-Place GN3625D Thermoformer
  • In-mould cutting ensuring consistent and accurate trim
  • Servo driven platen for smooth and energy efficient movement
  • Six point toggle systems with oversized roller bearings
  • High speed forming system
  • Multi-zone contact heating system
  • Electric preheater
  • Microprocessor-based control systems (PLC)
  • Computerized DC drive sheet transport with photo scanning capabilities for pre-printed materials
  • Static Eliminator
  • Stacking equipment available
GN Tooling
  • Cost effective tooling is designed, manufactured and production tested at our facility
Forming Area 915mm x 635mm (36" x 25") maximum
Depth of Draw 125mm (5") maximum
Material Thickness Range 0.15mm - 1.00mm (0.006"-0.040")
Power Supply 3x400V+N+PE, 50-60Hz (380-415V) / 3x480V+PE, 50-60Hz (440-480V) / 3x220V+PE, 50-60Hz (220-240V)
Cooling Water Consumption 14 Litres/min @ 15C - 20C (3 gal/min @ 58F - 68F)
Machine Dimensions (l x w x h) 3200mm x 2100mm x 2210mm (126" x 83" x 87")
Knife Length 10500mm (413") for APET / 11430mm (450") for other thermoformable materials
Sheet Width 965mm (38") maximum
Material Roll Diameter 711mm (28") maximum
Cycles per Minute 30 maximum
Power Consumption 12 Kilowatts/hr (Approximate)
Air Pressure 6.8 bar (100 PSI) minimum
Air Consumption 2300 Litres/min (80 CFM)
Machine Weight 5987 kg (13,200 lbs)
Menu Item

Menu Item

Menu Item


Would definitely recommend GN as a supplier; service is second to none and quality of machines is a world standard. ROI has been great. Negligible down time and quick to change. Maintenance costs ar...

Mike Thrupp | Flight Plastics, New Zealand

tradeSHOWS
ourPRODUCTS
ourSERVICES
contactUS
© 2018GN Plastics | Thermoforming Machines
Website Design by Amplify Media