GN3021CX
Features and Benefits
  • In-mould cutting ensuring consistent and accurate trim
  • Oversized tiebars
  • Low energy consumption
  • Double toggle system
  • Multi-zone heating
  • Minimum floor space requirements
  • Static eliminator
  • Low air consumption
  • Photo scanning available for preprinted sheet
  • Electric preheater
  • Stacking equipment available
GN Tooling
  • Cost effective tooling is designed, manufactured and production tested at our facility
Depth of Draw 125mm (5") maximum
Knife Length 9525mm (375") maximum - 7200mm (283") for APET
Clamping Force 100 Ton
Material Roll Diameter 711mm (28") maximum
Power Consumption 7 Kilowatts/hr (Approximate)
Air Pressure 6.8 bar (100 PSI) minimum
Air Consumption 1900 Litres/min (70 CFM)
Machine Dimensions (l x w x h) 2895mm x 1850mm x 2160mm (114" x 73" x 85")
Machine Weight 3636 kg (8016 lbs)
Dry Cycles per Minute 30 maximum
Main Supply Voltage 220V to 480V 24 Volt DC Control Voltage
Forming Area 760mm x 530mm (30" x 21") maximum
Sheet Width 815mm (32") maximum
Material Thickness Range 0.15mm - 1.00mm (0.006"-0.040")
Cooling Water Consumption 6 Litres/min @ 15C - 20C) (1.5 gal/min @ 58F - 68F)
Menu Item

Menu Item

Menu Item


GN machines are the best in the market. Buying a machine from GN, you get quality in their products. It is very gratifying to have GN's in my company because they produce higher quality products and...

Fernando Mazzuco do Santos | Sanpack, Brazil

tradeSHOWS
ourPRODUCTS
ourSERVICES
contactUS
© 2018GN Plastics | Thermoforming Machines
Website Design by Amplify Media