


Features and Benefits
- In-mould cutting ensuring consistent and accurate trim
- Oversized tiebars
- Low energy consumption
- Double toggle system
- Multi-zone heating
- Minimum floor space requirements
- Static eliminator
- Low air consumption
- Photo scanning available for preprinted sheet
- Electric pre-heater
- Stacking equipment available
- Cost effective tooling is designed, manufactured and production tested at our facility

Forming Area | 560mm x 508mm (22" x 20") maximum |
Machine Dimensions (l x w x h) | 2718mm x 1600mm x 2616mm (107" x 63" x 103") |
Machine Weight | 2526 kg (5568 lbs) |
Power Consumption | 5.5 Kilowatts/hr (Approximate) |
Knife Length | 6350mm (250") maximum |
Material Thickness Range | 0.15mm - 1.00mm (0.006"-0.040") |
Cycles per Minute | 30 maximum |
Air Pressure | 6.8 bar (100 PSI) minimum |
Air Consumption | 1360 Litres/min (48 CFM) |
Clamping Force | 60 ton |
Sheet Width | 595mm (23.5") maximum |
Material Roll Diameter | 711mm (28") maximum |
Main Supply Voltage | 220V to 480V 24 Volt DC Control Voltage |
Cooling Water Consumption | 6 Litres/min @ 15C - 20C (1.5 gal/min @ 58F - 68F) |
Depth of Draw | 125mm (5") maximum |